Fabrication Shop

Facilities

  • Fabrication Shop = 1100m2
  • Office/Administration = 280m2
  • Sheet Metal/Insulation Shop = 90m2
  • Laydown Area (Outside) = 5200m2
  • Sub-Contractors Paint Shop Adjacent to Fabrication Shop

Fabrication Shop Equipment

  • Bandsaw (14″ Capacity) C/W Hydraulic Vise & 30 ft Conveyor
  • Radial Drilling Machine (8-14″ Column, 1-1/2″ Cap)
  • 10 Welding Machines (GTAW, SMAW, FCAW, GMAW, & SST)
  • Hydraulic Tensioning & Torqueing Equipment
  • 2 Overhead Cranes (3.2 Tonnes Each)
  • 2 Portable End Preparation Lathes
  • Plate Roll (1/2″ Plate x 8′ Wide)
  • Hydrostatic Test Pump Assembly
  • Magnetic Drill c/w Slugger Set
  • Plate Shear (3/4″ Plate @ 6′ Wide)
  • 5 Cantilever Beam Cranes (1 Tonne)
  • 8.5 Tonne Yard Carrier Deck
  • 50 Tonne Hillman Rollers
  • Pipe Threader (3/4″ to 4″)
  • 25 HP Oil Injected Rotary Screw Compressor
  • 4 Weld Positioners
  • Mitre Mandrel Kit

AMEIL is in close proximity (1 mile) to heavy capacity docking facilities to allow marine shipping or large industrial packages.